Date: 2011 Sept 05 Version: 1.1.2(Build:9)
changes:
- RS232 speed 9600 Baud removed; not really necessary and to slow for file transfer
- new file load indicator at immunity window start-up; helpful for long calibration files
- changed USB-drivers included
fixes:
- level field display error at Level Sweep and Level Sweep Spot Values, introduced with version V 1.1.2(Build: 8), removed
----------------------------------------------------------------------------------------------------------------------Date: 2011 April 06 Version: 1.1.2(Build:8)
fixes:
- error at system calibration, introduced with version V 1.1.2(Build: 7), removed
----------------------------------------------------------------------------------------------------------------------
Date: 2011 March 09 Version: 1.1.2(Build:7)
changes:
- help system changed to *.chm files for Win7 compatibility
fixes:
- at graphical representation of *.mon files unit changed to dB, cursor values renamed from FPow: to Att:
- write error of *.cal and *.mon files in the Comment window (without NSG 4070) removed
- measurement mode 4-6 or BCI are automatically activated at a click to the 8 measurement parameter keys
----------------------------------------------------------------------------------------------------------------------Date: 2011-02-09 Version: 1.1.2(Build:6)
changes:
- threshold search step width also with absolute values (V, mA, dB) possible
- monitoring output at test start also as constant High- or Low- Level available
----------------------------------------------------------------------------------------------------------------------
Date: 2011-01-04 Version: 1.1.2(Build:5)
changes:
- user port outputs will be set at the start of calibration
----------------------------------------------------------------------------------------------------------------------
Date: 2010-10-13 Version: 1.1.2(Build:4)
changes:
- negative values in "Additional Att." field now possible
----------------------------------------------------------------------------------------------------------------------
Date: 2010-07-27 Version: 1.1.2(Build:3)
changes:
- two additional Level- Editor Tables for Ford standard EMC-CS-2009
- temporary display of the eight storage keys parameter assignments
- immunity test on one frequency possible
fixes:
- English help file corrected
- display error in the Level- Editor showing curves with linear steps on a logarithmic frequency axis removed
- track bar test level changes by "Page Up/Down" can be applied with the "Enter" key
- wrong error message display at system calibration removed
----------------------------------------------------------------------------------------------------------------------Date: 2010-05-06 Version: 1.1.2(Build:2)
changes:
- graphical display of *.bmc files possible
- an additional columns in the Level- Editor allow remote controlling of the NSG 4070 Amplifier Mode (int.; ext.; mix.)
- reading and converting of new *.cfg files with synthesizer limitation possible; converting of old files with PW:UP_FILES possible
fixes:
- error in calculation of step numbers at "Number Per Decade" removed;
- absent display of monitoring event "Power Limited" at test scan, graphical representation of test results and in the test report removed
- indication of "Power Limited" as PWLim in the test report
- IP-Address field limitation to two Numbers (only under special circumstances) removed
----------------------------------------------------------------------------------------------------------------------
Date: 2009-11-26 Version: 1.1.2(Build:1)
changes:
- two additional columns in the Level- Editor allow remote controlling of MD 4070 and SW 4070 (also at Calibration); therefore a new file type *.bmc is implemented, to allow automatic switchover of the MD 4070
- beginning with firmware V1.25 file transfer also possible about the RS232 or USB port; all limitations of this remote ports removed; this allows the remote controlling about an optical cable (hardware available)
fixes:
- in generator window some errors in the Multi Channel Frequency Sweep mode removed
- Threshold Search down now works correctly
----------------------------------------------------------------------------------------------------------------------
Date: 2009-07-24 Version: 1.1.1(Build:5)
changes:
- program start in color OFF mode
- program usable with 120 dpi (minor graphical inaccuracies are possible)
- for immunity test now frequency tables usable
- additional usable delay for the scanning of the monitoring ports
- additional monitoring output for simultaneously controlling of monitoring probe and rf-switch
- in generator window reduced frequency outputs at slider movement; leads to a synchronous freqouency tuning on NSG 4070 and prevents measurement interrupts of the programs power meters
fixes:
- graphic cursor also on grid lines visible
- transparent background on 16:9 screens removed
- now date/time stamp of NSG4070 file remain unaffected when copied to the PC
- cursor movement with keyboard limited to the visible frequency range
- improvements in the auto range display
----------------------------------------------------------------------------------------------------------------------
Date: 2008-09-19 Version: 1.1.1(Build:4)
changes:
- amplifier button for devices without amplifier not accessible
fixes:
- copy function from PC to NSG4070 reactivated
- error in frequency sweep with "Grid Absolute" removed
- initialisation error in "Multi Channel" frequency sweep removed
----------------------------------------------------------------------------------------------------------------------
Date: 2008-07-16 Version: 1.1.1(Build:3)
changes:
- DEMO modus for program demonstration
- Level- and Table-Sweeps are also possible for BCI tests
- activatable, optical and acoustical signal at test end for operator alerting
- additional, downwards threshold search mode
- activatable, WinXP style program appearance
- program operation on 120 dpi screen possible (with little graphic inaccuracies)
- display and print of test setup pictures
- display and print of *.jpg files in the Files window
- ASCII table output now with column headlines and readable monitoring events
- additional placeholder for probe current in predefined, commend strings
- additional Log-file parameters as frequency in Hz, comma separation and inverted PWM value
- 3 separated reference memories for the power meters at the frequency sweep
- measurement cursor movement about the 4 cursor keys
- updated program help files
fixes:
- error of truncated text labels removed
- graphic print centred
- graphic error after frequency zoom removed
- error in the predefined, commend string output for analog voltage removed
graphical error at display of curves below 100 kHz removed
----------------------------------------------------------------------------------------------------------------------
Date: 2008-04-16 Version: 1.1.0(Build:4)
changes:
- print function at the graphical representation of test results and calibration curves
fixes:
- error meassage at BCI test without monitoring probe at the end of the test
- error meassage at the opening of the Immunity window after a 4-6 test with "Ask User" option removed
----------------------------------------------------------------------------------------------------------------------
Date: 2008-03-12 Version: 1.1.0(Build:3)
changes:
- Short Key F4 and F5 for Start/Stop and Holt/Continue
additional impuls on a Userport output at the start of a test (to Reset the EUT)
additional, definable delay time for the start of the "Threshold Search". Allows the EUT a grater reaction time for the jump from the test level to the threshold search start level.
fixes:
- ON/OFF switching of the NSG4070 at threshold search at the last test frequency removed
----------------------------------------------------------------------------------------------------------------------
Date: 2008-03-10 Version: 1.1.0(Build:2)
fixes:
- switching off the NSG4070 after a level sweep
- error after screen saver activation with windows decinal seperator "," removed
- wrong number of measurement steps with "Nomer per decade" in the generator window (causes a runtime error at a reference measurement in the generator window)
----------------------------------------------------------------------------------------------------------------------
Date: 2008-01-13 Version: 1.1.0(Build:1)
changes:
- added BCI testing according to ISO 11452-4
- ramp function for test level
- BCI range sweep with new range-level-editor. Introducing new file typs for this sweep mode.
Range definition file : *.blv
Range calibration file : *.bcl
Range test results : *.brs - All file are only usable on the PC and not on the NSG 4070 !
- addded automatic threshold searching
- configguring of the monitor outputs possible
- 8 additional keys for storing and recalling of test parameter sets
- initialising the global setup menu entrys (BCI and 4-6) with the actual test parameters
- introduced a new ISO step whith, according to ISO 11451/2
- definable comment strings with templates, for the slider and comment buttons in the Immunity window
- COM port numbers up to 30 avalable
- new frequency sweep mode in the Generator window for four port measurements with graphical representation
- frequency synchron measurement recording of the 3 power meter cannals in to a *.log file
