| Note | Description of Technical Note |
|---|---|
| TN041 | Compliance3 Portable Software Licence notes |
| TN040 | 10th October 2005. Service Pack for Compliance3 Emission, EMIPAK3 and GTEM3 users to avoid errors in "oleaut32.dll" which have occirred since the release of Windows XP2 Servuce Pack 2. |
| TN039 | 27th September 2005 Overlaying results traces in Compliance3 Emission, EMIPAK3 and GTEM3 Emission software |
| TN038 | 18th August 2005 Creating a Compliance3 Emission/GTEM3e, EMIPAK3 equipment configuration |
| TN037 | 16th May 2005 Exporting projects from GTEM3 Emission software |
| TN036 | 31-Mar-2005 Teseq SCR350x series receiver drivers for Compliance3 software |
| TN035 | 01 Dec-2005: Exporting projects from Compliance3 Immunity software |
| TN034 | 01 Dec-2005: Exporting projects from Compliance3 Emission software |
| TN033 | 24-Jun-2004: Serial port problems with fast PCs |
| TN032 | 08-Apr-2004: Compliance3 Emission and EMIPAK3 error messages |
| TN031 | 12-Feb-2004: Hints on using EMIPAK 3 for the first time |
| TN030 | 02-Feb-2004: Chamber methods (CM-001) AND (CM-002) |
| TN029 | Choosing an Antenna Calibration for NSA Measurements |
| TN028 | Choosing an Antenna Calibration for Emission Measurements |
| TN026 | Calculating the Antenna Factors for a single antenna using RDS9980 |
| TN025 | Compliance3 debug modes |
| TN024 | Choosing an Antenna Calibration |
| TN023 | RDS9980 installation |
| TN022 | DIA1512/DIS9966 Diap1.Par file values |
| TN021 | Withdrawn - Out of Date |
| TN020 | Use of the DIAP2.FRQ file |
| TN019 | Dual Channel Power Meter driver files - additional features with CIS9942 v4.32 |
| TN018 | Missing object errors - Error 424 |
| TN016 | Withdrawn - see TN018 |
| TN015 | Use of non-National Instruments cards |
| TN014 | Unsupported drivers for CIS9942 v4.31 and above |
| TN013 | CIS9942 Amplifier Driver File format |
| TN012 | What to look for in an amplifier |
| TN011 | What to look for in an antenna |
| TN010 | Speeding up load time for EPS9980 and CES9985 |
| TN009 | Required Test Equipment for common RF commercial immunity standards |
| TN008 | Copying objects from a database to another database |
| TN007 | EMC Windows Software Error codes |
| TN006 | Teseq EMC Systems software drivers |
| TN005 | Precalibration of EMCO turntables |
| TN004 | Using a Single channel Power Meter with CIS9942 |
| TN003 | Naming conventions for National Instruments devices |
| TN002 | Creating a calibration file using CIS9942 |
| TN001 | Use of the NI GPIB-PCII/IIA card with Windows '95 and above |
