Back to home
Ametek
 

Absorbing Clamps / Ferrite Tube

Absorbing Clamps are used for measuring interference signals on power supply cables. Decoupling clamps and ferrite tube are available for a variety of different EMC applications.

 
  • Product

    Description

     
  • CMAD 10

    CMAD 10

    Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.

  • CMAD 20B

    CMAD 20B

    Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.

  • FT 801

    FT 801

    Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm

  • KEMA 801

    KEMA 801

    The KEMA 801 is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.

  • MDS 21B

    MDS 21B

    The absorbing clamp MDS 21B enables to measure the interference capability of radio interferers, such as domestic appliances, electric tools etc. directly; viz. by measuring the power generated by the interferer and fed to its supply cable.