Back to home
Ametek
 

CBA 6G-200D

1 GHz to 6 GHz 200 Watt Single Band Power Amplifier

Image
  • Class A Operation
  • Touch Screen Color display
  • Input Overdrive Protection
  • USB, Ethernet, GPIB and RS232
    interface
  • Built in Calibrated Directional Coupler
 

New class A, high power density, design has allowed us to produce a 200 watt, 1.0 GHz to 6 GHz amplifier in a compact 4U package. With a minimum of 200 watts of linear power this amplifier is ideal for RF immunity testing in a GTEM Cell or with a wide range of available horn antenna such as the Teseq BHA range. Readily integrated with the Teseq ITS 6006 80 MHz to 6 GHz test system these amplifiers can form part of a broadband test system. The new touch screen colour display gives an immediate visual indication of forward and reverse power along with the current operating status of the amplifier and access to diagnostic information such as gate current and heatsink temperature.Fan speed adjusts depending on the heatsink temperature thus ensuring the minimum audio noise level possible in the operating environment. The inbuilt calibrated forward power coupler provides a quick and easy way to monitor forward power with any power meter. Input overdrive protection prevents damage to the input devices due to accidental high input power. Multiple remote interfaces are available as standard including USB, GPIB, RS232, and Ethernet. Amplifier gain can be controlled either remotely through one of the available interfaces or via the front panel touch screen.

Typical Powerzoom
 

Key Parameters

Frequency

1.0 GHz to 6.0 GHz

Saturated Power

250 Watts (minimum)

Power at P1 dB

200 Watts (minimum)

Gain

53 dB

Gain Flatness

+/-3 dB

Additional RF Data

Harmonics at 30 W

-20 dBc (Typical) -18 dBc (Minimum)

Maximum Input without Damage

+15 dBm

Spurious

-60 dBc

Stability

Unconditionally stable

Load VSWR without damage (All Phase Angles)

Infinite

Load VSWR without fold back (All Phase Angles)

2:1

RF Input

Type N (socket)

RF Output

Type N (socket)

Gain Control

0 – 30 dB in 255 steps

Impedance/VSWR

Output Impedance

50 Ω

Input VSWR

2:1

Output VSWR

2:1

Interfaces and Electrical

Interface

Touch screen, GPIB, RS232, Ethernet & USB

Safety Interlock

BNC Connector, Open for Standby

Supply Voltage

85 –264 Vac

Supply Frequency

47–63 Hz

Supply Power Requirement

< 2 KVA (typical full power)

Physical and Environmental

Dimensions

7U, 19 Inch Rack width, 615 mm deep

Weight

50 kg

Temperature Operational

0 °C–40 °C

Temperature Non Operating

-40 °C–85°C

Humidity (Non Condensing)

95%

Options: To be specified at time of ordering

Rear Panel RF Connectors

CBA 6G-200D-10

Front Panel RF Connectors

CBA 6G-200D

Datasheet

 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.