Back to home
Ametek
 

CSP 9160

EMC Emission/Immunity Sensing Probe

CSP 9160zoom
  • As defined in CISPR 16-1-2
  • Suitable for emission measurements per CISPR 16-2-1, CISPR 22 and CISPR 32
  • Suitable for BCI testing per MIL STD-461 and various automotive standards
  • Flat frequency response
  • Ruggedly designed
 

The CSP 9160 is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses.
A convenient feature of the CSP 9160 is that, from 100 kHz to 120 MHz, it has a flat frequency response with a 0 dB transducer factor, allowing voltage measurements to be read as current, directly without any correction. The probe can be easily and quickly clipped around the cable under test and the RF currents measured using an oscilloscope, spectrum analyzer, or EMI receiver. Its large aperture (25.4 mm) can accommodate most cables and can handle power lines with currents up to 50 amps.

 
Parameter Value

Frequency range

9 kHz to 200 MHz

Insertion loss

34 dB ±2 dB (50 Ω system, 100 kHz to 120 MHz)
typical ±1 dB, see also the graphs in the datasheet

Insertion impedance

<1Ω

RF connector

BNC

Window diameter (aperture)

25.4 mm

Datasheet

Gallery

 
 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Manfred A. Bergsch
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.