Back to home
Ametek
 

FT 801

Ferrite tube

FT 801zoom
  • Excellent decoupling from 150 kHz
  • Conform with IEC 61000-4-6 ed. 4
  • Simple insertion in the test setup
  • Large diameter of 35 mm
 

The FT 801 is recommended as an additional decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6 when using the clamp injection method. It shall be inserted on all the cables between EUT and AE except the cable under test. The FT 801 prevents, that the test signal applied to the EUT affects other devices, equipment or systems, which are not under test and improves the reproducibility of the test results.
The large inner diameter of the FT 801 allows threading of cables with connectors.

 
Parameter Value
Frequency range

150 kHz to 1000 MHz

Insertion loss

as given in the graph

Maximum cable diameter

35 mm

Dimension (LxWxH)

670 mm x 70 mm x 80 mm

Weight

approx. 8 kg

  • Related Products

    Description

     
  • KEMZ 801

    KEMZ 801

    The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.

  • Related Accessories

    Description

     
  • CAL KEMZ

    Calibration fixture for KEMZ/KEMA 801

Datasheet

Gallery

 
 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.