Back to home
Ametek
 

ISN T2

Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

ISN T2zoom
  • For use with one unscreened balanced pairs
  • Refers schematic circuit example in CISPR 22/32 Figure D.1/G.1
  • Intended for connection to cable category 3 and 5
  • Changeable pin-arrangements with RJ11 and RJ45
  • Can be used as CDN for IEC/EN 61000-4-6 immunity tests
 

Impedance stabilization networks (ISN, or with CISPR 16-1-2 called AAN: asymmetric artificial network) are defined for measuring of conducted common mode disturbances at information technology equipment (ITE) as required in CISPR 22 and CISPR 32. The ISN is placed between the equipment under test (EUT) and auxiliary equipment (AE) or load which are necessary for the operation of the EUT. The ISN establishes the common-mode termination impedance for the EUT’s telecommunications port during measurement and emulates the unsymmetrical contribution (longitudinal conversion loss, LCL) of the connected line. Different ISNs are available in relation to the line category, line numbers and pin-arrangement.

The ISN T2A is designed for measurements on one unscreened balanced pair and consists of one basic network (ISN T200A) with D sub 25 connectors and special adapter sets. A set of adapters consists of LCL adapters to realize the longitudinal conversion loss (LCL)- requirements for the EUT-side in relation to the used cable category (cat. 3, cat. 5) and a connection adapter for the AE-side.

 
Parameter Value
Frequency range

150 kHz to 80 MHz

Line parameters

1 pair

Power rating (EUT- and AE Port)

AC max. voltage (line to ground): 63 V
DC max. voltage (line to ground): 100 V
Current max: 600 mA
Test voltage: 200 VDC, 2 s

Common mode impedance (EUT Port)

150 kHz to 30 MHz: 150 Ω ±20 Ω
30 MHz to 80 MHz: 150 Ω ±40 Ω

No entries

  • Related Accessories

    Description

     
  • CAS ISN

    Calibration Kit for ISN T

  • FIX ISN

    Magnetic fixture for ISN T2A, ISN T4A, ISN T8, ISN T8-Cat6 or CDN T8

Datasheet

Gallery

 
 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.