Back to home
Ametek
 

NSG 435 ESD SIMULATOR

Compact and Cost Effective

NSG 435zoom
  • Programmable discharge voltage 200 V to 16.5 kV
  • Stabilized charging voltage
  • Pre-programmed IEC/EN 61000-4-2 test settings
  • True air-discharge breakdown voltage
  • Compact and lightweight design
 

Ergonomic design and advanced functionality. The pistol-shaped NSG 435 simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible.

NSG 435’s microprocessor-based controller and multifunction keypad provide the operator with instant access to its comprehensive range of built-in functions. The LCD panel continuously displays the operating status and all user-selected test parameters.

NSG 435 has its own internal, battery operated high voltage generator. In addition to the pre-programmed, standard IEC pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching. An optional mains supply is available for extended test operation or for use when the battery is being charged.

 
Parameter Value

Basic set

Carrying case with: electrostatic discharge simulator, battery pack, battery charger 100 to 240 VAC, discharge network 150 pF/330 Ω, air- and contact-discharge tips, grounding cable, tripod adapter, user manual

Pulse
network

Network 150 pF/330 Ω as per IEC/EN 61000-4-2 (included)
Range of R/C networks for other standards: R = 0 Ω to 10 kΩ; C = 60 to 500 pF

Discharge voltage

Air-discharge: 200 V to 16.5 kV (in 100 V steps)
Contact-discharge: 200 V to 9 kV (in 100 V steps)

Discharge 
tips

Ball and point as per IEC

Charging voltage measurement

kV, accuracy better than ±5% (stabilized); measurement and display of true air flashover voltage

Discharge detection

Indicated by an oval around the kV symbol, also acoustically in the 'Single' operating mode (air-discharge only)

Holding time

>5 s (charging voltage ... ±5%)

Polarity

Positive / negative / automatic change

Operating modes

Single / repetitive =
pulse counter: 0 to 9999, preselect counter 0 to 9999
Repetition: 0.5/1/5/10/20 or 25 Hz (air); 0.5/1/5 or 10 Hz (contact);
continuous operation

Display

LCD panel showing: charging voltage, discharge voltage, polarity, air-/contact-discharge, counter/preselect counter content, soft-key functions, battery monitor

Weight

NSG 435 with battery: 1.2 kg (2.6 lbs) approx.

Ambient conditions

Operation: +5 to +40°C, 20 to 80 % r.h. (non-condensing), 68 to 106 kPa

  • Related Accessories

    Description

     
  • MD 103

    ESD Pulse Calibration Set

Complete list of accessories can be found in the ESD brochure in the download section.

Datasheet

User manual

Brochures

Gallery

 
 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Manfred A. Bergsch
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.