Back to home
Ametek
 

NSG 5500

Automotive Transient Immunity Tests

NSG 5500zoom
  • Clean, compliant pulses on the single output
  • Built-in 100 A coupler/battery switch
  • All common international and vehicle manufacturer standard transients achieved in one compact solution
 

The compact and modular NSG 5500 solution offers the generators necessary for tests with capacitive discharge pulsed interference as called for by ISO, SAE, DIN and JASO, and others. The established test specifications for passenger cars together with the new standards for commercial vehicles published by these international and other bodies are fully covered, as are the most company-specific standards from vehicle manufacturers. Based on our exclusive Gemini technology, Teseq offers the most flexible and upgradeable system to protect the users’ investment.

NSG 5500 system. This compact mainframe houses the common system components and accommodates the standard pulse generators. All testing is available from one output connector. An electronic switch to connect and disconnect the battery supply is in-corporated in the NSG 5500. Additional inputs and outputs are located on the rear panel for test execution control purposes and the monitoring of error signals, oscilloscope triggers, gate start/stop commands, etc. Overall control is via a PC running AutoStar™ under Windows.

 
Parameter Value
Instrument power supply

100 – 120 VAC ±10%, 47 – 63 Hz
220 – 240 VAC ±10%, 47 – 63 Hz

Dimensions

19” desktop housing (rack mountable), height 330 mm (13”), depth 510 mm (20”)

EUT supply

Integrated 100A CDN
From an external source, e.g. battery or PA 5840 power amplifier/battery simulator

Computer interface

IEEE 488 (recommended) or USB

Input DC voltage range

60 V

DC current

100 A (250 A for 200 ms)

  • Related Models

    Description

     
  • NSG 5500-1

    A NSG 5500 in a single-height 7 height unit rack.

  • NSG 5500-2

    A NSG 5500 in a double-height 14 height unit rack. Can contain two load dump modules and three transient modules.

  • Related Products

    Description

     
  • NSG 435 ESD SIMULATOR

    NSG 435 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2, up to 16.5 kV

  • NSG 437 ESD SIMULATOR

    NSG 437 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 438 FLAGSHIP ESD SIMULATOR

    NSG 438 FLAGSHIP ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 439 ESD SIMULATOR

    NSG 439 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2 and ISO 10605, up to 30 kV. Designed especially for robotic applications.

  • PA 5740

    PA 5740

    This battery simulator is designed specifically for automotive EMC testing, Teseq’s 42 V ready power amplifier sets the pace for automotive battery simulation including features necessary for automotive immunity testing such as sense wires for cable voltage drop compensation and several operating modes for stability with complex automotive loads.

  • PA 5840

    PA 5840

    This battery simulator designed specifically for automotive EMC testing, Teseq’s 42V ready amplifier sets the pace for automotive battery simulation including features necessary for automotive immunity testing such as sense wires for cable voltage drop compensation and several operating modes for stability with complex automotive loads.

  • NSG 5071

    NSG 5071

    The NSG 5071 is designed exactly in accordance with EMC-CS-2009.1 for test CI 220 pulses A1, A2-1, A2-2, C1, C2 and RI 130 using an inductive/relay transient generator test circuit.

  • AES 5501

    AES 5501

    The AES 5501 is a system of electronic and mechanical switches, an artificial network, and a unique control station designed for emissions testing to ISO 7637-2.

Datasheet

User manual

Brochures

Firmware

Video

 

Gallery

 
 
 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Manfred A. Bergsch
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3