Automatic Step Transformer
The automatic step transformer type INA 6502 is a standard accessory for the NSG 3040 series. It enables the AC power supply voltage, which is fed to the EUT, to be set to 0%, 40%, 70% or 80% of UIN under program control.
The INA 6502 complies with the requirements of EN/IEC 61000-4-11(2004) for voltage dips and undervoltages. A large number of product standard specifications can be fully met as they do not ask for continuous and arbitrary voltage variations.
The device is connected to the NSG 3000 system via the system cable and is fully embedded in the configuration management concept, the software control and the report mechanism.
|Input voltage UIN||
Up to 250 VAC, 50/60 Hz
|Output voltage UVAR||
4 steps: 0% - 40% - 70% - 80% of UIN
|Voltage change with load||
100% output, 0 to 16 A less than 5%
80% output, 0 to 20 A less than 5%
70% output, 0 to 23 A less than 5%
40% output, 0 to 40A less than 5%
AMETEK CTS GmbH
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
Manfred A. Bergsch
Astrid Wälchli Schreiber
Register of companies: CH-280.4.015.069-3