GTEM test cells for EMC testing DC to 20 GHz to GTEM 250, 500, 750, 1000, 1250, 1500, 1750 and 2000 |
 |
- Emission and immunity testing in one fixed, shielded environment
- Meets IEC/EN 61000-4-20 and FCC ANSI C63.4
- Generated fields are largely homogeneous and simple to calculate
- Efficient power conversion requires smaller power amplifier
- Excellent VSWR over the entire frequency range - no need for measurement of reflected power
- Only simple single channel power meters required
- No antenna heights or polaritiy variation for emission testing
|
GTEM 250A SAE |
 |
- Test cell with special opening to test integrated circuits on approx. 45 mm septum height
- Meets IEC/EN 61000-4-20, SAE J1752/3, IEC 62132-2 and IEC 61967-2
- For 100 Watts input power
- Excellent VSWR up to 18 GHz
|
XYZ Manipulators for GTEM cells |
 |
- For turning the EUT into the required three orthogonal positions
- According to IEC/EN 61000-4-20
- Optional remote controlled
- Minimal RF reflections with virtually no metallic parts
|
SL 50 strip line |
 |
- EMC tests for vehicle components immunity to RF fields
- 150 mm strip line, impedance 50 Ω
- Conformity with the requirements of ISO 11452-5 and EU guidelines 95/94
- Efficient power conversion provides high fields with minimum power
- Up to 1 kW input power
|
SL 90 strip line |
 |
- EMC tests for vehicle components immunity to RF fields
- 150 mm strip line, impedance 90 Ω
- Conformity with the requirements of ISO 11452-5 and EU guidelines 95/94
- Efficient power conversion provides high field with minimum power
|
SL 150 strip line |
 |
- EMC tests for vehicle components immunity to RF fields
- 800 mm strip line
- Conformity with the requirements the EU guidelines 95/94
- Efficient power conversion provides high fields with minimum power
|
DTEM cell for the frequency range DC up to 400 MHz |
 |
- TEM cell meets ISO 11452-3
- EMC tests for vehicle components immunity to RF fields
- 300 mm septum height
- Up to 1 kW input power
- Access for field probes from the top of the cell
|
